RUBBER

Must-use additives for rubber manufactures, also includes lubricants and release agents…

Synthetic resins and fluoropolymers, water based, silicone free…

For rubber to metal in outsole production (SR-41F) and automotive parts (SR-42 LF)…

Soap based, high dilution ratio (1:10-40), liquid form, staining (for Mechanical Rubber Goods) and no-staining/non-black (out-sole footwear)…

NBR to metals (C-12), unvulcanized rubber to metals (G-25), fluoro-elastomer to metals/fibres (S-7)…

Waterbased pigment binder compound for fabric (Tribond W)…

*click the product name to download its Technical Data Sheet…

TIRES

Special case for rubber material for the complex manufacturing processes…

Synthetic resins and fluoropolymers, water based, silicone free, more than 6000 cycles and approved by Goodyear Int…

Synthetic resins in water, for sulphur (MRA 100) or peroxide cure (SK-44) and for tube production (SR-51A)…

Soap based, high dilution ratio (1:10-40), liquid form, less foam tendency, metaal ftty acid based (806 LI), sodium based (820 LI) or Ca-Na Phosphate for zero foam and no marking (825 LI)…

Release between tire and bladder, water based, mica based, filled & non filled type, single & multiple release type and white, grey and black color options…

Applied outside green tire, sidewall area, water based, quick dry time, matte or natural color options…

Lubricant for uniformity machines, silicone free, dry without residue, apply by spray, brush or sponge…

Prolong bladder standing time/life, applied as base coat, enhances release effects, extra lubricant agent option (BC-918 HSW)…

*click the product name to download its Technical Data Sheet…

WOODS

The do-before of laminate products, reducing formaldehyde emissions, stabilizers, lubricants, etc…

Mainly for MDF, Particle Board and OSB. Applicable for single, multidaylight and continuous presses. Water based, high dilution ratio (1:10-100). Special for thin MDF and HDF board (402 WS 12 CAF), sprayed on chips/fibre mat and press plates (403 X), applied on the glue (406) and special for pMDI glue (409 K 301)…

Effectively reduce formaldehyde emission without affecting product performance, mainly for MDF, PB and OSB. Low dosage applied directly to resin mix (UF/MUF). Chlorine free (Fiberline 489)…

Formalin stabilizer, inhibiting polymer chaining in relatively low temperature. 2% solution in methanol applied to formalin during stirring (Fiberline 499). A paste form stabilizer + emulsifier for paraffin wax (Fiberline 495)…

  • Fiberline 495 (a paste form stabilizer + emulsifier for paraffin wax)
  • Fiberline 499 (2% solution in methanol applied to formalin during stirring)

*click the product name to download its Technical Data Sheet…

LAMINATES

Paper impregnation process, hot-pressed décor paper with resin adhesives such as melamine or isocyanate…

Water based internal release agent for High and Low pressure paper impregnation with UF/MF/PF/mix resins. Shortening press time. Also act as resin stabilizer in storage…

For MF/UF paper impregnation. No fish-eyes, streaking and blisters. Prevent dusting, bleeding in resin bath, boost hardener effects. Could be combined with RA-330 series…

For Melamine Formaldehyde impregnation resins with long pot-life and high curing activity, shortening press time, no resin sagging, decreasing blisters, only slight pH change. For faster effects (CA-342-0 MU) with shorter pot-life…

Universal anti-block-system for amino plastic resin solution. Suitable for decor coating of chip boards and fiber boards with PF resins. For short cycle as well continuous production of high pressure laminates.

Universal anti-dust for laminating process. Smoothing impregnated paper surface and prevent it from dust. Mainly for MF resins. Provides high color saturation…

Resin additives and modifiers for higher gloss level and better surface properties…

  • CA 340-0 (for urea resin)
  • CA 341-0 (for melamine resin)
  • CA 342-0 MU (for urea and melamine resin, faster effects, with shorter pot-life)
  • AD-362
  • GP-355 (for urea and melamine resin, improve flow properties)
  • MFG-356 (for melamine resin, improve laminate surface closeness & haptic)

*click the product name to download its Technical Data Sheet…

DIE CASTING

A specified release agents for each metal used…

Water based and eco friendly release agents for Aluminum (DRW 210), Zinc (DRW 222) and Magnesium (DRW 225) die castings…

for cold-chamber die casting and plunger, with graphite or without, minimizing wear of plunger tip, reducing down time and low smoke formation. Oil based (DPL-230 & 240) or pellet form (DPL-252 white & black)…

Fire resistant formulation of glycols of different chain lengths, water and special additives. Non-toxic and biodegradable, compatible with most elastomers, fully water soluble, foam control and good air release, practically unlimited service life…

Ready to use high temperature lubricant paste for dies to prevent metallizing, contains no heavy metals and halogen, an economic, versatile and effective lubricant…

High temperature (up to 1000°C) paste for ladle coating to prevent soldering and contamination, excellent wetting and film forming, homogeneous thin film and protection from corrosion…

Silver paste for Aluminum dies, for difficult parts of the die, excellent wetting and film forming, homogeneous thin film and protection from corrosion…

High temperature lubricant and anti-seize compound, protecting from corrosion, rust, water, heat and acid. Excellent wetting and film forming, homogeneous thin film…

  • DRW 210 (Aluminum die casting)
  • DRW 222 (Zinc die casting)
  • DRW 225 (Magnesium die casting)
  • DPL-230
  • DPL-240
  • DPL-252 white
  • DPL-252 black
  • HF-270
  • AS-280
  • LC-290
  • PA-260
  • CG-265

*click the product name to download its Technical Data Sheet…

COMPOSITE

For those who love the boats they build…

Surface porosity & scratches sealer in metal and composite molds, also enhancing release effect, keep the molds clean…

for steel and aluminum molds, especially suitable in short cycle pressing processes, keep the molds clean…

Water based multiple release per application, hard and durable release film, no VOC, non-transferring, can be used on cold and high temperature molds, by spray or wipe-on. Suitable for steel, aluminum and composite molds…

Conventional water based release agent blended with special wax and polymer, provide excellent release and surface properties for wide range of industrial application, multi release, easy to use, no VOC, cost effective…

Internal release agent for pultrusion, SMC, BMC, etc., excellent slip and gliding during pultrusion, drastically reduce water absorption, scratch resistance, easy blending in compounds…

Highly effective water based cleaning agents, to non-aggressively remove traces of release agents and resins building up in in the mold, applied by brush, sponge or spray…

  • TM-128 PP
  • Y-series
  • G-160 series
  • G-170 series
  • DexClean
  • CL-90 series

*click the product name to download its Technical Data Sheet…

Miscellaneous

Easily dissolved/low melting point polyethylene bags for easier quantifying and transport in rubber or polymer mixing processes…

for footwear, leather, synthetic leather, fabric, hands, etc… for machine, floor, etc…

Coating release agent for polyurethane molds. For hot or cold cure process, for semigloss or matte finish…

  • Mill Bag  R-70 (sizes in cm: 15/20, 20/25, 25/30, 25/40, 30/45, 30/50, 35/50, 45/70, 50/70, 60/80, 70/90)
  • Triwash W (Soft Cleaners for footwear, leather, synthetic leather, fabric, hands, etc.)

  • Triwash H110 (High Powered Cleaners for machine, floor, etc.)

  • Embossed PES (Poly Ethylene Sheets for preventing sticky between rubber mat)
  • KS-260 VC 1 (Cutting liquid, coolant and lubricant for metal working processes)
  • HT-490 (Chain & Belt Lubricant, even for high temperature and load, doesn’t form lacquer-like residues, for continuous press systems: steel belts, heating plates, roller bar chains, friction points, contact pressure, etc.)

*click the product name to download its Technical Data Sheet…